[img]https://i.imgur.com/YzpXlaM.jpeg[/img]
Pinkbike's suspension geometry guessing with my IC estimations laid over (the thick lines). This is based on my quoted ramblings on the previous page about...
Pinkbike's suspension geometry guessing with my IC estimations laid over (the thick lines). This is based on my quoted ramblings on the previous page about the two links connecting to the 'axle link' define the IC of the 'axle link', thus driving the antisquat and brake jack calculations.
EDIT: I'm doubting the correctness of all of this.
I posted this in the PB comments thread already but I had a couple different guesses (I attached the one which seems more likely), although my pivot locations are a little off since I hadn't seen the non- drive side photos.
new sram brake rotors? [img]https://p.vitalmtb.com/photos/forums/2021/06/09/10933/s1200_troybrosnan_199211894_1201603150287335_1950748722063805156_n.jpg[/img]
new sram brake rotors?
Good ol' G2 I think. I know Jared Graves used them as they bite a bit better
Im not sure but the stanchions look quite big for a boxxer [img]https://p.vitalmtb.com/photos/forums/2021/06/10/10934/s1200_23070BE8_7FE6_429E_ABF3_7E5DF2706465.jpg[/img]
Im not sure but the stanchions look quite big for a boxxer
Yes they’re definitely not 35mm anymore. To be expected imo. Can’t have your enduro fork be thicker than your Dh fork. Not for performance but for marketing🙃
Im not sure but the stanchions look quite big for a boxxer [img]https://p.vitalmtb.com/photos/forums/2021/06/10/10934/s1200_23070BE8_7FE6_429E_ABF3_7E5DF2706465.jpg[/img]
Im not sure but the stanchions look quite big for a boxxer
Öhlins and Specialized Factory Racing have just signed for another three years, with Öhlins announcing extended support for other riders as well -> read more here.
New Sram discs after ages 🤞🏼 [img]https://p.vitalmtb.com/photos/forums/2021/06/10/10937/s1200_E8FF1299_E863_42BD_A861_9B8BB9F6CEC0.jpg[/img]
[img]https://p.vitalmtb.com/photos/forums/2021/06/10/10938/s1200_EFDF8544_1174_47CD_85BA_97699A6B42B8.jpg[/img]
spotted on myriam nicole's IG story: an uncovered seatstay bidge on the new commencal protos. Looks like its bolted together, not sure if it was to simplify manufacturing or to let them tune the rear end stiffness/damping for performance reasons. Either way an interesting bit and something they're trying to keep covered.
Also noticed that in riding photos from practice, Amaury is running the silver/raw upper link, not the black one shown in previous photos of his bike. Maybe just an A/B bike thing; I don't know how many set-ups each rider on that team has.
New Sram discs after ages 🤞🏼 [img]https://p.vitalmtb.com/photos/forums/2021/06/10/10937/s1200_E8FF1299_E863_42BD_A861_9B8BB9F6CEC0.jpg[/img]
[img]https://p.vitalmtb.com/photos/forums/2021/06/10/10938/s1200_EFDF8544_1174_47CD_85BA_97699A6B42B8.jpg[/img]
https://www.vitalmtb.com/photos/features/PIT-BITS-Leogang-World-Cup-Dow…
here ya go. had to "adjust" the gallery.
But yeah, it was to be expected.
Post a reply to: MTB Tech Rumors and Innovation