read somewhere that‘s the new druid proto, that‘s why there‘s a lyrik.
The druid is about to be updated soon (probably a wee bit more travel, more aggressive geo,etc.), wonder where it'll slot between the "old" druid, the dreadnought and their upcoming dh frame...
The bike in this pic also has a Lyrik+super deluxe air but in his insta posts it has a Zeb+ super deluxe coil, maybe two different bikes. I know they have a new druid coming soon so maybe the pic of the bike above is the new druid.
If my job was to be really fast, and something that you could put on a fox fork (that isn't a SRAM product) was asked to...
If my job was to be really fast, and something that you could put on a fox fork (that isn't a SRAM product) was asked to be removed, I'd be frickin pissed.
Especially if you are excelling at the "be really fast" aspect of the job requirement...
I remember a slideshow pic of Brook Macdonald's Marzocchi fork from back in the Mondraker (pre-Fox ownership of course) days running a Fox damper. That pic wasn't up for too long
Krabo is correct she was on the new gen 6 fuel EX... If she didnt have those couple of issues and say "won" it wouldve been funny as hell, a 140mm trail bike won an EWS,(still ews in my mind)
Spotted on the other site and Instagram that the Trek Factory Racing riders at the EDR are not running sponsor correct tyres, look to be on...
Spotted on the other site and Instagram that the Trek Factory Racing riders at the EDR are not running sponsor correct tyres, look to be on the Sharpie/Maxxis program. XC team seem to be running Pirelli, be interesting to see what the DH team are running come the first world cup.
Well, if I was on the sharpie program and had to choose some tires, I'd go for Conti. Best tires around currently IMO.
Here's hoping the 38mm Boxxer does actually have the same Zeb casting and bolt pattern for the fenders, the front lip on that fender looks just...
Here's hoping the 38mm Boxxer does actually have the same Zeb casting and bolt pattern for the fenders, the front lip on that fender looks just right. Current Zeb fender is a bit weak.
it has two bolts near the dust seals, so probably won't fit
Here's hoping the 38mm Boxxer does actually have the same Zeb casting and bolt pattern for the fenders, the front lip on that fender looks just...
Here's hoping the 38mm Boxxer does actually have the same Zeb casting and bolt pattern for the fenders, the front lip on that fender looks just right. Current Zeb fender is a bit weak.
it has two bolts near the dust seals, so probably won't fit
Didn't even look closely enough at my own post to see that, good eye.
I actually just solved the floppiness of my own Zeb's fender the other day. Realised it rattled in the rough, and that there isn't enough bracing outside the plane of the 3 bolts, they must've realised the same.
Here's hoping the 38mm Boxxer does actually have the same Zeb casting and bolt pattern for the fenders, the front lip on that fender looks just...
Here's hoping the 38mm Boxxer does actually have the same Zeb casting and bolt pattern for the fenders, the front lip on that fender looks just right. Current Zeb fender is a bit weak.
Didn't even look closely enough at my own post to see that, good eye.
I actually just solved the floppiness of my own Zeb's fender the...
Didn't even look closely enough at my own post to see that, good eye.
I actually just solved the floppiness of my own Zeb's fender the other day. Realised it rattled in the rough, and that there isn't enough bracing outside the plane of the 3 bolts, they must've realised the same.
+1 for rattley Zeb fender. tried to add some foam to quiet it down but didn't help. Adding additional bolts might help, but would need a new casting.
Here's hoping the 38mm Boxxer does actually have the same Zeb casting and bolt pattern for the fenders, the front lip on that fender looks just...
Here's hoping the 38mm Boxxer does actually have the same Zeb casting and bolt pattern for the fenders, the front lip on that fender looks just right. Current Zeb fender is a bit weak.
Didn't even look closely enough at my own post to see that, good eye.
I actually just solved the floppiness of my own Zeb's fender the...
Didn't even look closely enough at my own post to see that, good eye.
I actually just solved the floppiness of my own Zeb's fender the other day. Realised it rattled in the rough, and that there isn't enough bracing outside the plane of the 3 bolts, they must've realised the same.
How did you solve it? Im getting some noise out front, could be that
Didn't even look closely enough at my own post to see that, good eye.
I actually just solved the floppiness of my own Zeb's fender the...
Didn't even look closely enough at my own post to see that, good eye.
I actually just solved the floppiness of my own Zeb's fender the other day. Realised it rattled in the rough, and that there isn't enough bracing outside the plane of the 3 bolts, they must've realised the same.
Didn't even look closely enough at my own post to see that, good eye.
I actually just solved the floppiness of my own Zeb's fender the...
Didn't even look closely enough at my own post to see that, good eye.
I actually just solved the floppiness of my own Zeb's fender the other day. Realised it rattled in the rough, and that there isn't enough bracing outside the plane of the 3 bolts, they must've realised the same.
No it wont, they got fox to follow. Added support using the air bleeders
...unfortunately I have broken numerous Mudguards from Fox due to riding in the cold, or by loading the bike in the car. The support at the air bleeders is the weak spot IMO. Beginning of the year switched to RRP and have been happy and rattle free since.
Didn't even look closely enough at my own post to see that, good eye.
I actually just solved the floppiness of my own Zeb's fender the...
Didn't even look closely enough at my own post to see that, good eye.
I actually just solved the floppiness of my own Zeb's fender the other day. Realised it rattled in the rough, and that there isn't enough bracing outside the plane of the 3 bolts, they must've realised the same.
How did you solve it? Im getting some noise out front, could be that
Well, solved might be a stretch because I didn't ride it yet, but put some mastic tape on the two 45 degree surfaces seems to resist my slaps well enough.
Could be. You can see the data logger on the riders right fork leg.
Ive just never seen anything like that mounted to the top left of the fork with a round tube. Or on the gear brake caliper. The BYB data system is mounted on the downtube.
The druid is about to be updated soon (probably a wee bit more travel, more aggressive geo,etc.), wonder where it'll slot between the "old" druid, the dreadnought and their upcoming dh frame...
The bike in this pic also has a Lyrik+super deluxe air but in his insta posts it has a Zeb+ super deluxe coil, maybe two different bikes. I know they have a new druid coming soon so maybe the pic of the bike above is the new druid.
Druid v2 should be out soon.
I remember a slideshow pic of Brook Macdonald's Marzocchi fork from back in the Mondraker (pre-Fox ownership of course) days running a Fox damper. That pic wasn't up for too long
Krabo is correct she was on the new gen 6 fuel EX... If she didnt have those couple of issues and say "won" it wouldve been funny as hell, a 140mm trail bike won an EWS,(still ews in my mind)
Well, if I was on the sharpie program and had to choose some tires, I'd go for Conti. Best tires around currently IMO.
whats old is new again...from the other site:
Some good close up photos of srams new brake on the pink side.
it has two bolts near the dust seals, so probably won't fit
Sharpie, the worst tool for keeping MTB secrets. Looks like the new caliper is MAVAN or NAVAN.
Didn't even look closely enough at my own post to see that, good eye.
I actually just solved the floppiness of my own Zeb's fender the other day. Realised it rattled in the rough, and that there isn't enough bracing outside the plane of the 3 bolts, they must've realised the same.
Would that be MAVEN?
styx would be proud
Looks like it to me. Terrible name, hate that word.
ma·ven - an expert or connoisseur.
Tim Hopey is BACK!
yep "MAVEN", that's what I think as well
Amazing sleuthing...
What bothers me more than the name is some serious lack of good look :/
Can't sharpie that out...
Homage to Hayes DH Purple edition circa 25 years ago 🙃… damn I’m old lol.
+1 for rattley Zeb fender. tried to add some foam to quiet it down but didn't help. Adding additional bolts might help, but would need a new casting.
How did you solve it? Im getting some noise out front, could be that
No it wont, they got fox to follow. Added support using the air bleeders
...unfortunately I have broken numerous Mudguards from Fox due to riding in the cold, or by loading the bike in the car. The support at the air bleeders is the weak spot IMO. Beginning of the year switched to RRP and have been happy and rattle free since.
Now back to team rumors...
Well, solved might be a stretch because I didn't ride it yet, but put some mastic tape on the two 45 degree surfaces seems to resist my slaps well enough.
New wheelset from dt swiss, fr 1500.
From veronica widmann's instagram story
J bend confirmed, 32 spokes if I see correctly?
So 240 exp hubs, competition spokes and fr541 rims?
Hm... 🤔
If there is the opposite of Sharpie, this is it.
Some interesting stuff hanging off AP’s Commencal V5. Top of the left fork tube and rear axle / caliper.
Looks like data acquisition kit ^^
Could be. You can see the data logger on the riders right fork leg.
Ive just never seen anything like that mounted to the top left of the fork with a round tube. Or on the gear brake caliper. The BYB data system is mounted on the downtube.
Post a reply to: MTB Tech Rumors and Innovation