PUSH NINE.ONE Fork

• Uniquely tuned 44mm upper chassis and inverted design
• Proprietary fork bushings are precision fit and individually hand burnished to mating stanchion tubes
• Bushing design keeps the bushings submerged in fork oil, providing constant and consistent lubrication
• Each fork features proprietary ULF seals, like the bushings, constantly and consistently lubricated
• MicroXD micro-finished hardcoat stanchion tubes reduce friction and increase durability
• Spring assembly sits inside a lubricated “Silent Surround” chamber for quiet, smooth, maintenance-free action
• Position-sensitive ABS pneumatic bottoming system, independent from main coil spring, provides additional support for the final 10-45mm of travel
• Bolt-on axle lugs allow easy switches between axle offsets and wheel sizes
• Dual Standoff Direct Mount brake mount system eliminates mounting brackets for different rotor sizes
• Integrated, high-impact polymer material fork guards for lower-leg protection
• Front brake hose guide and low-mount fender integrated in fork guards
• User internally adjustable travel from 140mm-170mm in 10mm increments, no additional parts needed
• Internal tuning of the compression base valve, rebound piston, and mid valve is available for riders riding at an elite level
• More aggressive riders can reposition the ABS bottoming-out unit's main piston as an additional tuning tool
• Boost floating through axle eliminates binding friction
• Outer tube speed service feature allows riders to remove fork lubrication fluid and replace it while the fork is on the bike
• Pressure relief valves on the backside of the fork crown with a completely sealed pull-to-release design
• Oversized 38mm axle clamp area, 4-bolt design
• Motorex 3D Response Technology Fork Oil
• Made in Colorado, USA
• 1-year limited warranty and Warranty Reset Program*
* After every annual service performed by a PUSH Factory Authorized Service Center, you get a full warranty reset for another year of use