Wolf Tooth CAMO Direct Mount Spider For SRAM

This is a CAMO Spider ONLY. A CAMO Chainring is required to complete this system.

• This spider is designed to work with the SRAM cranksets with a 3-Bolt direct mount interface.
• Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth:
• M8 (6mm offset - dished towards the frame)
• For use with GXP cranks and BB30 Long Spindle standard 49mm chainline.
• Praxis Works Road/CX cranks use this offset.
• See the image below for how to measure your spindle length if you have BB30.
• This is for use on bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. Details here on the 148mm Boost spacing.
• M5 (3mm offset - Boost)
• dished towards the frame) is for 52mm chainline for Boost bikes.
• Praxis Works mountain bike cranks use this offset for DM-A chainrings.
• This link explaining 148mm Boost spacing will help you decide if you need the M5 or M8.
• M2 (0mm offset)
• Is for a 55mm chainline on a DUB spindle crankset.
• Is for a 49mm chainline on a BB30 short spindle crankset.
• Praxis Works mountain bike cranks use this offset for DM-B chainrings.
• See the image below for how to measure your spindle length if you have BB30.
• P2 (plus 4mm offset - dished outwards away from the frame)
• For fat bikes that have 190/197 rear spacing but use a 100mm spindle. This is now very common on production fat bikes to keep the q-factor slimmer
• Can be used for creating a "boost" chainline with a BB30 short spindle crankset
• CAMO mounting bolts are included with each spider but can also be purchased separately in a variety of colors
• Chainline - varies by which spider you choose. See compatibility above.
• If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck.
• All Camo Spiders are not compatible with Bash Guide ISCG05