Wolf Tooth CAMO Direct Mount Spider For Race Face Cinch

This is a CAMO Spider ONLY. A CAMO Chainring is required to complete this system.

Compatibility
• This is a spider for use with the Race Face Cinch system
• 3 different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth:
• M8 (minus 8mm - dished towards the frame) is for standard 49mm chainline. This is for use on bikes with 135mm QR, 142mm thru axle, and some 148mm bikes.
• M5 (Boost - minus 5mm - dished towards the frame) is for 52mm chainline that boost bikes may need. This link explaining 148mm "Boost" spacing will help you decide if you need the M5 or M8.
• P3 (plus 3mm - dished outwards away from the frame) is for fat bikes that have 190/197 rear spacing but use a 169mm spindle. This is now very common on production fat bikes to keep the q-factor slimmer
• Colored CAMO mounting bolts can be purchased separately, but all the CAMO spiders come with stainless steel bolts if you don't order them.
• All Camo Spiders are not compatible with Bash Guide ISCG05
Installation notes:
• You will be able to access all bolts without removing the spider
• Line up the little dot on the ring with the dot on the spider. Don't worry, you cannot install the ring in the wrong rotational orientation.
• Be sure the bosses on the spider "plug in" to the chainring.
• Torque bolts only to 4-5 Nm and use blue Loctite threadlocker