Abbey Hanger Alignment Gauge (HAG)

The derailleur hanger is the foundation of the modern drivetrain and needs to be straight to work properly. With modern bikes getting as many as 13 cogs in the space used to fit 8, it's never been more important to make sure that hanger alignment is perfect.

Half precision measuring instrument and half pry bar.

Tolerances as tight as a quarter of a thousandth of an inch (.0063mm) in some critical dimensions of this tool.

Ability to lock in the feeler so you don't have to second guess your measurement after bumping it on the tire.

Top half of tool will rotate out of the way of fender stays and frame tubes.

Feeler gauge stick stores inside the top half of the tool, very handy for the traveling mechanic.

T bolt extends past the tool for access to those problematic hangers found on some modern full suspension bikes.

Compact at just under 11" ( 28cm).

Re-buildable. While ideally your HAG should be sent back for a rebuild, it is possible to do them in the field by replacing the brass bushing in the T-Bolt.

Compatible with the three most common wheel sizes: 26", 27.5"/650B and 700/29"