Posts
6
Joined
6/2/2010
Location
Englewood, CO
US
Edited Date/Time
8/16/2014 8:05pm
2011 Santa Cruz Butcher Medium frame (Green)
2011 FOX Van 36 RC2 fork (tapered steerer)
FOX RP23 rear shock
Chris King Inset tapered headset (black)
Shimano XTR M970 3X9 Shifters
Shimano XT M770 crankset (170mm, 22t & 34t)
MRP lrp chain retention system w/bashguard (black)
Shimano XT M772 Shadow Rear Derailleur (medium cage)
Shimano XT front derailleur
Sram PG-990 11-34 cassette (gold carrier)
Shimano Saint M810 Brake levers
Shimano XTR M965 Brake calipers
180mm front rotor, 160mm rear rotor
Azonic Double Wall handlebar 770mm (green)
Gravity Gap 60mm X 8degree stem (black)
Thomson Elite 30.9 seatpost (black)
Fizik gobi saddle (Ti rails)
Sun/Ringle Equalizer rims 32h (black)
Shimano M525 QR rear hub (black)
KK Disc 20mm front hub (black)
Maxxis High Roller 26x2.35 Super Tacky tires
Oury lock-on grips (green)
This frame has been ridden 1 (short) season (in Breckenridge). Some of the components were swapped from a prior frame. The wheels I've been riding on this bike have sustained their fair share of wear (my rear rim has several dings). So I am swapping them out with the Sun/Ringle wheels, which are in much better shape (not gonna BS ya, the front hub could use some new bearings, probably less than $8 for each). The rotors and pads have been recently replaced. I have put a good amount of miles on it this summer but I have also maintained the bike rather well throughout the season. The underside of the down tube has a SLIGHT tailgate dimple and is absolutely nothing to be concerned about from an integrity standpoint. I installed a new XT BB the 1st week of October.
2011 FOX Van 36 RC2 fork (tapered steerer)
FOX RP23 rear shock
Chris King Inset tapered headset (black)
Shimano XTR M970 3X9 Shifters
Shimano XT M770 crankset (170mm, 22t & 34t)
MRP lrp chain retention system w/bashguard (black)
Shimano XT M772 Shadow Rear Derailleur (medium cage)
Shimano XT front derailleur
Sram PG-990 11-34 cassette (gold carrier)
Shimano Saint M810 Brake levers
Shimano XTR M965 Brake calipers
180mm front rotor, 160mm rear rotor
Azonic Double Wall handlebar 770mm (green)
Gravity Gap 60mm X 8degree stem (black)
Thomson Elite 30.9 seatpost (black)
Fizik gobi saddle (Ti rails)
Sun/Ringle Equalizer rims 32h (black)
Shimano M525 QR rear hub (black)
KK Disc 20mm front hub (black)
Maxxis High Roller 26x2.35 Super Tacky tires
Oury lock-on grips (green)
This frame has been ridden 1 (short) season (in Breckenridge). Some of the components were swapped from a prior frame. The wheels I've been riding on this bike have sustained their fair share of wear (my rear rim has several dings). So I am swapping them out with the Sun/Ringle wheels, which are in much better shape (not gonna BS ya, the front hub could use some new bearings, probably less than $8 for each). The rotors and pads have been recently replaced. I have put a good amount of miles on it this summer but I have also maintained the bike rather well throughout the season. The underside of the down tube has a SLIGHT tailgate dimple and is absolutely nothing to be concerned about from an integrity standpoint. I installed a new XT BB the 1st week of October.
Post a reply to: 2011 Santa Cruz Butcher Medium