On One Hello Dave, mullet, rigid
Parts
Frame
Hello Dave
chopped seattube for moar dropper
Frame:
On-One Hello Dave.
Misc: chopped seattube for moar dropper
Fork
36 elite
vorsprung secus installed. alternatively custom Marino rigid fork, 510 a2c, 65 offset
Fork:
FOX 36 elite.
Misc: vorsprung secus installed. alternatively custom Marino rigid fork, 510 a2c, 65 offset
Headset:
Wolf Tooth Premium
Handlebar
Stooge
Moto bar
Handlebar:
Other Stooge.
Misc: Moto bar
Stem
copperhead
50mm. was worried it might be too long but it helps counteract the 17deg sweep bars
Stem:
DEITY copperhead.
Misc: 50mm. was worried it might be too long but it helps counteract the 17deg sweep bars
Brakes
dominion A4
if you like maguras, get these instead
Brakes:
Hayes dominion A4.
Misc: if you like maguras, get these instead
Shifters:
SRAM x1.
Misc: 11s
Rear Derailleur:
SRAM x1.
Misc: 11s
Cranks:
Race Face Aeffect R.
Misc: 170
Chainrings / Sprocket
32t oval
Chainrings / Sprocket:
Wolf Tooth 32t oval
Cassette / Rear Cog
xt 11-46
Cassette / Rear Cog:
Shimano xt 11-46
Pedals
wolftooth
waveform large
Pedals:
Other wolftooth.
Misc: waveform large
Front Rim
arc40 29
the reserve fillmore valves are actually super nice with cushcore, ik theyre too expensive but I will probably buy more
Front Rim:
Race Face arc40 29.
Misc: the reserve fillmore valves are actually super nice with cushcore, ik theyre too expensive but I will probably buy more
Rear Rim:
Race Face arc35 27.5
Hubs
vesper
don't do powder coated hubs its a bad idea
Hubs:
Onyx vesper.
Misc: don't do powder coated hubs its a bad idea
Front Tire
SE4 29x3
cushcore plus
Front Tire:
Bontrager SE4 29x3.
Misc: cushcore plus
Rear Tire
mazza trail 27.5x2.6
cushcore pro
Rear Tire:
Vittoria mazza trail 27.5x2.6.
Misc: cushcore pro
Saddle
overture
dumb but not as uncomfortable as youd expect
Saddle:
Chromag overture.
Misc: dumb but not as uncomfortable as youd expect
Seatpost
210
had to reposition the actuator to let the housing make the curve out of the frame cause the insert depth is so close
Seatpost:
OneUp Components 210.
Misc: had to reposition the actuator to let the housing make the curve out of the frame cause the insert depth is so close
General Info
Riding Type:
Trail / All-Mountain
Weight: 35 lb 0 oz (15,876 g)
63.2 HA, 78.2 SA, 456 CS, 493 reach, 1308 wheelbase. For reference, I'm 5'7 on a good day. Definitely a lot of bike to throw around
picked this frame up cheap to try longer geometry, honestly expected the 460mm chainstays and 50mm+ bb drop to kinda suck but it's super fun, it rips lift access with a suspension fork and I've been pushing it's singletrack capabilities with a custom rigid fork, which started as it's own experiment on my Chromag. Bike is supposed to be full 29 but the mullet wheelset was already built for my stylus and the numbers didn't look too awful with this frame so I went for it, and somehow the 54mm bb drop with the rigid fork isn't that unmanageable. Been reading too much MeatEngines and had to do some internet spelunking to find some 29x3 Bontrager SE4s, but it rides great and is wildly supportive at 11psi. weight is a wild guess, it feels very front heavy tho
Additional Info:63.2 HA, 78.2 SA, 456 CS, 493 reach, 1308 wheelbase. For reference, I'm 5'7 on a good day. Definitely a lot of bike to throw around
picked this frame up cheap to try longer geometry, honestly expected the 460mm chainstays and 50mm+ bb drop to kinda suck but it's super fun, it rips lift access with a suspension fork and I've been pushing it's singletrack capabilities with a custom rigid fork, which started as it's own experiment on my Chromag. Bike is supposed to be full 29 but the mullet wheelset was already built for my stylus and the numbers didn't look too awful with this frame so I went for it, and somehow the 54mm bb drop with the rigid fork isn't that unmanageable. Been reading too much MeatEngines and had to do some internet spelunking to find some 29x3 Bontrager SE4s, but it rides great and is wildly supportive at 11psi. weight is a wild guess, it feels very front heavy tho