Crossworx Dash290 by emptybox 4
Crossworx Dash 29
CWD Current Setup
Sideview
Early Setup
Pre welding
Tack welded
Cerakote finish
Assembly
Dh Sign HPX Stem
Cerakote Wheels
Dvo Without ugly Colour
USD Stanchion Guards
FLO Levers
Slamset
Needlebearings
BYB Setup
Parts
Brand
Model
Additional info
Parts
Rear Shock
DVO
Jade
Running with redline "like water" oil
Rear Shock:
DVO Jade.
Misc: Running with redline "like water" oil
Fork
Other
Bandit
Intend Bandit set to 170
Fork:
Other Bandit.
Misc: Intend Bandit set to 170
Headset
Cane Creek
Slamset
Headset:
Cane Creek Slamset
Handlebar
Other
Cerakote
Handlebar:
Other.
Misc: Cerakote
Stem
Other
DH Sign Hpx or Joystick
Stem:
Other.
Misc: DH Sign Hpx or Joystick
Grips
DMR
Grips:
DMR
Brakes
Shimano
Brakes:
Shimano
Brake Levers
Other
FLO Racing Levers custom fitted
Brake Levers:
Other.
Misc: FLO Racing Levers custom fitted
Shifters
SRAM
GX 11spd
Shifters:
SRAM.
Misc: GX 11spd
Rear Derailleur
SRAM
GX DH 7 Speed (Works fine for 11 spd casettes)
Rear Derailleur:
SRAM.
Misc: GX DH 7 Speed (Works fine for 11 spd casettes)
Cranks
Shimano
Cranks:
Shimano
Bottom Bracket
Shimano
Bottom Bracket:
Shimano
Chain
SRAM
Chain:
SRAM
Cassette / Rear Cog
SRAM
xx1 11spd
Cassette / Rear Cog:
SRAM.
Misc: xx1 11spd
Pedals
Funn
Pedals:
Funn
Front Rim
DT Swiss
Front Rim:
DT Swiss
Rear Rim
DT Swiss
Rear Rim:
DT Swiss
Spokes
DT Swiss
Revo
Spokes:
DT Swiss.
Misc: Revo
Front Tire
Maxxis
With pepis insert
Front Tire:
Maxxis.
Misc: With pepis insert
Rear Tire
Maxxis
With pepis insert
Rear Tire:
Maxxis.
Misc: With pepis insert
Saddle
BikeYoke
Saddle:
BikeYoke
Seatpost
BikeYoke
Seatpost:
BikeYoke
General Info
General Info
Model Year
Model Year:
Riding Type
Trail / All-Mountain
Riding Type:
Trail / All-Mountain
Weight
34 lb 9.8 oz (15,700 g)
Weight: 34 lb 9.8 oz (15,700 g)
Additional Info
On this bike i tried to do as much as i can myself, wich was quite a lot. There were lots of first times for me like welding a frame and doing cerakote on the frame and some components. Also the stanchion guards for the forks are completly custom made with 3d printed mounts. I also spent quite some time experimenting with different suspenion components and setup. Dont worry though the exo tires will soon be replaced by some thicker casing tires.
Additional Info:
On this bike i tried to do as much as i can myself, wich was quite a lot. There were lots of first times for me like welding a frame and doing cerakote on the frame and some components. Also the stanchion guards for the forks are completly custom made with 3d printed mounts. I also spent quite some time experimenting with different suspenion components and setup. Dont worry though the exo tires will soon be replaced by some thicker casing tires.
1/19/2023 3:00pm
More Bike Checks
Neat Bikes Enduro V1 made by a 17 year old, me, Pau de Bofarull
Pau
18 Photos
Updated: 25/02/2025
60
2087
9
View replies to: Crossworx Dash290 by emptybox
Comments