original_MHML5030.jpg 15

Image

We're big Gee Atherton fans here at Vital. The British badass, while plagued by injury last year, has been crushing it on the World Cup downhill circuit for years, and often in the face of adversity or injury. He takes some of the gnarliest slams only to shake off the dust (when it's safe to do so) and pin it on race day. His focus and grit is almost unparalleled in the sport.

When Trek Factory Racing announced their sponsor list last week, we were excited to see the bikes up close and get some rundown on the new spec. Hope, Renthal, MRP and WTB now help round out their race packages. Though Gee finished out the 2017 season on the Session 29er, his early-season routine has him on the 27.5. Will that stick for World Cup time? We're not sure, but regardless, the Sessions for Trek Factory Racing are blinging.

Gee says, "I'm most particular about suspension and cockpit. I make changes to my suspension on every track and every set of conditions to make the feel of the bike consistent no matter what else is going on. We work with the technicians from FOX to make the tiny adjustments necessary to get the most from the bike on every run. I like my suspension firm, with the front always slightly firmer than the rear because I ride quite far off the back. My cockpit always needs to feel exactly the same. At any race we’ll have spare cockpits already set up. If I crash, we can change out the assembled bar / stem / brake levers set-up and not waste time making adjustments."

  • Frame: Trek Session 27.5
  • Shock: FOX Float X2 225 x 75mm (Trunnion mount)
  • Fork: FOX 40 Float
  • Stem: Renthal Integra 35 50mm/+10mm rise
  • Headset: Hope Tapered 49/56mm
  • Grips: Renthal Ultra Tacky Lock On
  • Bars: Renthal Fatbar 35 790mm width, 30mm rise
  • Shifter: SRAM X01DH 7-speed
  • Derailleur: SRAM X01DH 7-speed
  • Brakes: Hope Tech 3 V4 / Hope Floating 203mm Rotors
  • Seatpost: Hope Carbon Seat Post, 31.6mm
  • Saddle: WTB Volt Team (Titanium)
  • Crank: Hope Crankset 165mm/83mm
  • BB: Hope Stainless Steel 30mm
  • Ring: Hope Spiderless Retainer Ring 36t
  • Chain Guide: MRP G4
  • Cassette: Hope 7-sp DH1 10-21t
  • Chain: SRAM PC-1130
  • Pedals: Crank Brothers Mallet DH
  • Wheelset: Hubs - Hope Pro 4 32h, Rims - Bontrager Line DH30
  • Tires: Bontrager G5 27.5 x 2.5-inch width
  • Tubes: Tubeless
  • Wheelbase: 1282mm
  • Chainstay: 446mm
  • Headangle: 63-degrees
  • Weight: 15.85kg / 34.94 pounds
  • Bar width: 790mm

 

Credit
Moonhead Media
Gee Atherton's 2018 Trek Session
15 comments

Comments

In reply to by Oz_Taylor

In reply to by fulgacian

In reply to by Oz_Taylor

In reply to by Oz_Taylor

In reply to by peecee

In reply to by peecee

The Latest